Labtron

Horizontal Autoclave LHA-I11 is a floor standing unit which has a built in printer and a touch screen display to preset the parameters. It has a capacity of 80 L. The process of water filling, heating up, sterilizing and drying are fully automated. Alarm system to show the completion of cycle and fault messages is included. It has Electric lock door system to ensure the safety of user and also the equipment. It can be used to sterilize various material in operation room, labs, oral department, ophthalmology etc.

Internal Calibration Analytical Balance LINB-A15 is a high speed analytical weighing balance. Built-in magnetic sensor for faster weighing with stability. Equipped with a weighing capacity of 220 g with minimum weighing of 0.0004 g and 80 mm of pan size. The panel features five operational buttons with a slide glass windscreen for easy operation and an automated internal calibration.

Plant Growth Chamber LPGC-B11 with 350 L capacity is used to study or simulate different climatic conditions accurately. It offers without lighting: 0 to 50℃, with lighting: 10 to 50℃ temperature range, without any humidity controller. Designed with double wall highly insulated stainless steel inner chamber with semi-circular arcs at its corners for easy cleaning.

Stereo Microscope LSM-D11 is a zoom stereo microscope, with 45° inclined trinocular viewing head. With 4:5:1 zoom ratio, wide range zoom magnification of the specimen is observed in this microscope. Equipped with Built-in transformer with adjustable intensity for surface and sub stage illumination. Incorporated with bench stand, and a low-profile base for the ergonomics operations.

Dust Monitor LDMR-A10 based on light scattering principle is a portable unit which counts as well determine the mass concentration of particulates. Additionally it displays battery levels, flow rate, pump details etc. on the screen. SD card slot and USB port are available to store and transfer data respectively. It is widely used in laboratories, research institutes, industries, quality control department etc.

FTIR Spectrometer LIR-B10 offers gold coated reflecting mirrors to cover maximum light throughput with detection sensitivity with multilayer Ge coated KBr beam splitter specification, aluminum based cast design layout structure, and high intensity, long lasting air cooled infrared source. Designed with 7800 cm-1 to 350 cm-1 spectral range with high S: N ratios of up to 20,000:1. This FTIR executes operations such as scanning, data manipulation, quantitation, reporting, saving, user administration, and more. Features advance FTIR software workstation, adjusted for all versions of windows opera

Fiber Analyzer LFBA-A10 is designed with hidden solution, advance barrel pull structure to facilitates dosing operation, provide flexible, and safe fiber analysis. Advanced integrated infrared heating technology offers fast uniform heating of the crucible, more consistent sample extraction, higher extraction recovery, improved accurate test results. The crucible recoil function designed to prevent sample in the crucible cannot caking filtration. It can analyse crude fiber and Van Soest analysis to wash the fiber.

Microwave Digestion System LMWD-B11 is newly designed and fully upgraded with higher performance and safer protection system. Vessel quantity of 10 and vertical design for even distribution of microwave with multi safety protection functions. Equipped with contactless sensor monitoring with no burst disk design saves consumables cost and maintenance cost. Designed with 7 inch color touch screen with user-friendly interface for easy operation. Material used TFM material for inner vessel and PEEK glass material for outer vessel prevents corrosion. Offers free temperature and pressure measuremen

Automatic Potentiometric Titrator LPTT-A11 is equipped with burette valve integrated design, to avoid mutual interference of different titrimetric solutions. Built in with large and bright LCD screen display. During operation, stirring system is adopted for adjusting the stirring speed. Microprocessor controlled system automatic potentiometric titrator is designed to make performing titrations easier, more reproducible and more reliable than manual titrations. It performs automatic identification of pH standard solutions, also supports manual identification.

Fully-automatic Kjeldahl Analyzer LKA-C10 conducts titration and distillation simultaneously so as to neutralize the ammonia gas released which enhance the test efficiency and avoid the overflow of ammonia. It stand with a measuring range from 0.1 to 200 mgN which gives a maximum recovery of ≥ 99.5 %. The operating ambient temperature of the device starts from 10 °C to 35 °C. 8.0-inch LCD touch screen is used to set the distillation time, the amount of diluent, acid liquor and alkali. Diaphragm pump is used to add reagent so that the injure caused by high pressure pump can be neglected. Wirel

Type III Water Purification System LHWP-A13 is a modular design which meets the needs of basic laboratory water purifier. It provides Type III level water which is required for chemical and physical inspection or for washing lab glassware’s. These systems produce and reject water at the same time .Equipped with easy replaceable filters. It’s designed to deliver compliant purified water with clear quality parameters and care free maintenance

Automatic Microtome LAM-A10 is a fully automated microtome, offers adjustable speed with three sectioning modes (Continuous, Step, Single) for users selection. Designed with streamlined molded housing, hand wheel for smooth running and stepping-motor advance technology for fine sectioning and trimming of specimen with selectable specimen retraction. Features, a precise micro motion specimen feeding system, microcomputer controlled optical signal and stepper motor to regulate specimen feeding, and a removable waste tray for specimen dismantling. Automatic Microtome offers, 0.5 μm to 100 μm sec

The rotational Viscometer LVM-C10 with stylish and modern technology, measures viscosity very quickly and accurately. It does measure & save 30 pcs test data. It is used in any area that requires the study of flow of liquid properties. They are handheld, user-friendly, and portable in nature.

Haze meter LHM-A10 is used for haze and transmittance measurement. It has open measurement area with no limit on sample size, can carry out vertical measurements as well. It comes with different light sources such as A, C, D65 etc. for haze, transmittance measurement. Design confirms to ASTM & ISO standards, where transmittance compensation measurement provides high accuracy test result.

UV Water Purification System LUVW-A12 is a 30 L capacited revolutionary, modular design integrated with deionization cartridge, storage tank and UV sterilizer which helps in elimination of large amount of salts and other minerals from water using RO with TOC level of

LDI-A10 model is a dual purpose Oven/Incubator with forced air convection and microprocessor temperature air controller that ensures precision. It is equipped with polished stainless-steel chamber, double layer glass door, large viewing window and features independent temperature-limiting alarm.

Tablet Hardness tester LTHT-A11 is designed to detect breaking strength of tablets. It tests hardness value of tablets with specific tablet diameter and specific hardness range. User can reset, recycle the test parameters as its LED screen automatically locks test data being displayed.

-60°C Chest Freezers LCF-C11 comes with 270 L of capacity, offers temperature range from -10 to -60°C and ambient temperature ranges from 16 to 32°C. Designed with direct cooling system and manual defrost mode, equipped with HCFC-free and CFC mixture gas refrigerant. Inner material made up of stainless steel and external material made up of SPCC epoxy coating, anti-corrosion, rust-proof, easy to clean and maintain. Built in with multiple alarms such as high and low temperature, door opening, condenser overheated, sensor failure, low battery and power failure.

Lab Refrigerator-Freezer Combination LRFC-A16 unit is designed with the overall capacity of 288 L in which the refrigerator capacity 188 L and freezer capacity 100 L. It has the microprocessor controlled system, with digital LED display to show temperature of refrigerator and freezer at the same time. Offers a high-performance and space-saving alternative for cold lab storage. Features audible and visual alarm system (built-in alarm sensor), human-centred design and highly efficient separate compressor and separate controller of freezer and refrigerator for easy operations. It is equipped wit

Portable spectrophotometer LSP-A13 is adopted with every test calibration ETC technology, where the standard white boards included in the optical system for great accuracy of every measurement. Equipped with automatic gloss compensation technology to ensures the accuracy of the color measurement data for the surface of different gloss. The measurement of the color of the powder, granules & other materials can be done by adding the powder accessories to this spectrophotometer.